Sealer Accessories

  • Teflon Adhesives – 1″ x 10yds x 6mil

    PTFE (Teflon) Adhesives are similar to teflon covers except they include a silicone adhesive backing. The adhesives are applicable for temperatures between 100°F to 500°F (-73°C – 260°C). Teflon adhesives are available from 1/2″ to 2″ widths in 3mil, 6mil or 10mil thicknesses with a removable liner. Other sizes with or without a liner are available by special order. Teflon is a registered trademark of DuPont Corp.

     

    • 1″ x 10 yards, 6mil
    $27.90
  • Teflon Adhesives – 1/2″ x 10yds x 3mil

    PTFE (Teflon) Adhesives are similar to teflon covers except they include a silicone adhesive backing. The adhesives are applicable for temperatures between 100°F to 500°F (-73°C – 260°C). Teflon adhesives are available from 1/2″ to 2″ widths in 3mil, 6mil or 10mil thicknesses with a removable liner. Other sizes with or without a liner are available by special order. Teflon is a registered trademark of DuPont Corp.

     

    • 1/2″ x 10 yards, 3mil
    $14.30
  • Pre-cut Teflon Cover – 26″ x 12″ roll x 5mil

    PTFE Teflon coated fiberglass covers and tapes act as a protective barrier to hot wire contacts and provides a quick release surface. Applicable for temperatures from 400°F to 600°F. The covers and tapes come in a natural brown color and have the USDA approval for direct contact with food. Teflon is a registered trademark of DuPont Corp.

     

    Teflon Covers are available in 5mil thickness from a width of 1″ to 12″ in precut sizes for different types of sealers, or by the roll in 10 yard or 36 yard rolls. The Zone Teflon Cover is available in 1-1/2″ width, 5mil thickness. Custom sizes are available by special order.

     

    • 26″ width x 12″ roll, 5mil
    $22.90
  • Pre-cut Teflon Cover – 24″ x 12″ roll x 5mil

    PTFE Teflon coated fiberglass covers and tapes act as a protective barrier to hot wire contacts and provides a quick release surface. Applicable for temperatures from 400°F to 600°F. The covers and tapes come in a natural brown color and have the USDA approval for direct contact with food. Teflon is a registered trademark of DuPont Corp.

     

    Teflon Covers are available in 5mil thickness from a width of 1″ to 12″ in precut sizes for different types of sealers, or by the roll in 10 yard or 36 yard rolls. The Zone Teflon Cover is available in 1-1/2″ width, 5mil thickness. Custom sizes are available by special order.

     

    • 24″ width x 12″ roll, 5mil
    $21.50
  • Pre-cut Teflon Cover – 20″ x 12″ roll x 5mil

    PTFE Teflon coated fiberglass covers and tapes act as a protective barrier to hot wire contacts and provides a quick release surface. Applicable for temperatures from 400°F to 600°F. The covers and tapes come in a natural brown color and have the USDA approval for direct contact with food. Teflon is a registered trademark of DuPont Corp.

     

    Teflon Covers are available in 5mil thickness from a width of 1″ to 12″ in precut sizes for different types of sealers, or by the roll in 10 yard or 36 yard rolls. The Zone Teflon Cover is available in 1-1/2″ width, 5mil thickness. Custom sizes are available by special order.

     

    • 20″ wdith x 12″ roll, 5mil
    $17.20
  • Pre-cut Teflon Cover – 12″ x 12″ roll x 5mil

    PTFE Teflon coated fiberglass covers and tapes act as a protective barrier to hot wire contacts and provides a quick release surface. Applicable for temperatures from 400°F to 600°F. The covers and tapes come in a natural brown color and have the USDA approval for direct contact with food. Teflon is a registered trademark of DuPont Corp.

     

    Teflon Covers are available in 5mil thickness from a width of 1″ to 12″ in precut sizes for different types of sealers, or by the roll in 10 yard or 36 yard rolls. The Zone Teflon Cover is available in 1-1/2″ width, 5mil thickness. Custom sizes are available by special order.

     

    • 12″ width x 12″ roll, 5mil
    $11.50
  • Teflon Cover – 12″ x 10yds

    PTFE (Teflon) coated fiberglass covers and tapes act as a protective barrier to hot wire contacts and provides a quick release surface. Applicable for temperatures from 400°F to 600°F. The covers and tapes come in a natural brown color and have the USDA approval for direct contact with food. Teflon is a registered trademark of DuPont Corp.

     

    Teflon Covers are available in 5mil thickness from a width of 1″ to 12″ in precut sizes for different types of sealers, or by the roll in 10 yard or 36 yard rolls. The Zone Teflon Cover is available in 1-1/2″ width, 5mil thickness. Custom sizes are available by special order.

     

    • 12″ x 10 yards, 5mil
    $128.60
  • Teflon Cover – 1-3/4″ x 10yds

    PTFE (Teflon) coated fiberglass covers and tapes act as a protective barrier to hot wire contacts and provides a quick release surface. Applicable for temperatures from 400°F to 600°F. The covers and tapes come in a natural brown color and have the USDA approval for direct contact with food. Teflon is a registered trademark of DuPont Corp.

     

    Teflon Covers are available in 5mil thickness from a width of 1″ to 12″ in precut sizes for different types of sealers, or by the roll in 10 yard or 36 yard rolls. The Zone Teflon Cover is available in 1-1/2″ width, 5mil thickness. Custom sizes are available by special order.

     

    • 1 3/4″ x 10 yards, 5mil
    $28.60
  • Teflon Cover – 1-1/2″ x 10yds

    PTFE (Teflon) coated fiberglass covers and tapes act as a protective barrier to hot wire contacts and provides a quick release surface. Applicable for temperatures from 400°F to 600°F. The covers and tapes come in a natural brown color and have the USDA approval for direct contact with food. Teflon is a registered trademark of DuPont Corp.

     

    Teflon Covers are available in 5mil thickness from a width of 1″ to 12″ in precut sizes for different types of sealers, or by the roll in 10 yard or 36 yard rolls. The Zone Teflon Cover is available in 1-1/2″ width, 5mil thickness. Custom sizes are available by special order.

    • 1 1/2″ x 10 yards, 5mil
    $25.80
  • Teflon Cover – 1-1/8″ x 36yds

    PTFE (Teflon) coated fiberglass covers and tapes act as a protective barrier to hot wire contacts and provides a quick release surface. Applicable for temperatures from 400°F to 600°F. The covers and tapes come in a natural brown color and have the USDA approval for direct contact with food. Teflon is a registered trademark of DuPont Corp.

     

    Teflon Covers are available in 5mil thickness from a width of 1″ to 12″ in precut sizes for different types of sealers, or by the roll in 10 yard or 36 yard rolls. The Zone Teflon Cover is available in 1-1/2″ width, 5mil thickness. Custom sizes are available by special order.

    • 1 1/8″ x 36 yards, 5mil
    $40.00
  • Silicone Rubber – 59″ length

    Silicone Rubber (or pressing pad) is located in the upper handle or jaw of the sealer. It is the pressing lip of the sealer that applies pressure to the bag providing a smooth seal. If the silicone rubber has any burn marks or shows any wear, the appearance of the seal will be affected. In any case of wear or markings, we recommend replacing the silicone rubber.

     

    • 59″ Rubber
    $42.90
  • Silicone Rubber – 18″ length

    Silicone Rubber (or pressing pad) is located in the upper handle or jaw of the sealer. It is the pressing lip of the sealer that applies pressure to the bag providing a smooth seal. If the silicone rubber has any burn marks or shows any wear, the appearance of the seal will be affected. In any case of wear or markings, we recommend replacing the silicone rubber.

     

    • 18″ Rubber
    $14.90
  • Silicone Rubber – 12″ length

    Silicone Rubber (or pressing pad) is located in the upper handle or jaw of the sealer. It is the pressing lip of the sealer that applies pressure to the bag providing a smooth seal. If the silicone rubber has any burn marks or shows any wear, the appearance of the seal will be affected. In any case of wear or markings, we recommend replacing the silicone rubber.

     

    • 12″ Rubber
    $10.00
  • Replacement Kit – Long Hand Sealer (FS series) 32″

    • Replacement Kits are available for most sealers.
    • This is the most economical way to stock the worn out parts and avoid down time.
    • Please provide the sealer’s MODEL NUMBER when ordering.
    • The WH Long Hand Sealer Replacement Kits include:
      • 2 Elements
      • 1 Foot Teflon Cover
      • 2 Teflon Adhesives
      • 1 Blade (with cutter kits)
    • The FS Long Hand Sealer Replacement Kits Include:
      • 2 Element
      • 2 Teflon Covers
      • 2 Teflon Adhesives
    • 32″ x 2.7mm
    • Compatible with: FS series
    $19.00
  • Replacement Kit – Long Hand Sealer (with cutter) 26″

    • Replacement Kits are available for most sealers.
    • This is the most economical way to stock the worn out parts and avoid down time.
    • Please provide the sealer’s MODEL NUMBER when ordering.
    • The WH Long Hand Sealer Replacement Kits include:
      • 2 Elements
      • 1 Foot Teflon Cover
      • 2 Teflon Adhesives
      • 1 Blade (with cutter kits)
    • The FS Long Hand Sealer Replacement Kits Include:
      • 2 Element
      • 2 Teflon Covers
      • 2 Teflon Adhesives
    • 26″ x 2.7mm
    • w/ cutter
    $33.00
  • Replacement Kit – Long Hand Sealer (without cutter) 26″

    • Replacement Kits are available for most sealers.
    • This is the most economical way to stock the worn out parts and avoid down time.
    • Please provide the sealer’s MODEL NUMBER when ordering.
    • The WH Long Hand Sealer Replacement Kits include:
      • 2 Elements
      • 1 Foot Teflon Cover
      • 2 Teflon Adhesives
      • 1 Blade (with cutter kits)
    • The FS Long Hand Sealer Replacement Kits Include:
      • 2 Element
      • 2 Teflon Covers
      • 2 Teflon Adhesives
    • 26″ x 2.7mm
    • w/o cutter
    $25.00
  • Replacement Heating Element – 26″ x 8mm

    Replacement Heating Elements (Nichrome) for all our sealers with operating temperatures up to 1100°C to 1200°C are available in both flat and round types. Heating elements for foot sealers are available in 2mm, 3mm, 5mm and 10mm widths for flat elements and 0.8mm, 0.9mm and 1mm diameters for the round elements. Round elements are used for cut and seal type applications. Teflon coated nichrome wires in 0.6mm diameter are also available for foot sealers.

    $22.00
  • Replacement Heating Element – 24″ x 10mm

    Replacement Heating Elements (Nichrome) for all our sealers with operating temperatures up to 1100°C to 1200°C are available in both flat and round types. Heating elements for foot sealers are available in 2mm, 3mm, 5mm and 10mm widths for flat elements and 0.8mm, 0.9mm and 1mm diameters for the round elements. Round elements are used for cut and seal type applications. Teflon coated nichrome wires in 0.6mm diameter are also available for foot sealers.

    $14.00
  • Replacement Heating Element – 20″ x 5mm

    Replacement Heating Elements (Nichrome) for all our sealers with operating temperatures up to 1100°C to 1200°C are available in both flat and round types. Heating elements for foot sealers are available in 2mm, 3mm, 5mm and 10mm widths for flat elements and 0.8mm, 0.9mm and 1mm diameters for the round elements. Round elements are used for cut and seal type applications. Teflon coated nichrome wires in 0.6mm diameter are also available for foot sealers.

    $9.00
  • Replacement Heating Element – 18″ x 8mm or 10mm

    Replacement Heating Elements (Nichrome) for all our sealers with operating temperatures up to 1100°C to 1200°C are available in both flat and round types. Heating elements for foot sealers are available in 2mm, 3mm, 5mm and 10mm widths for flat elements and 0.8mm, 0.9mm and 1mm diameters for the round elements. Round elements are used for cut and seal type applications. Teflon coated nichrome wires in 0.6mm diameter are also available for foot sealers.

    $16.00
  • Replacement Heating Element – 18″ length

    Replacement Heating Elements (Nichrome) for all our sealers with operating temperatures up to 1100°C to 1200°C are available in both flat and round types. Heating elements for foot sealers are available in 2mm, 3mm, 5mm and 10mm widths for flat elements and 0.8mm, 0.9mm and 1mm diameters for the round elements. Round elements are used for cut and seal type applications. Teflon coated nichrome wires in 0.6mm diameter are also available for foot sealers.

    $4.00
  • Replacement Heating Element – 16″ x 5mm

    Replacement Heating Elements (Nichrome) for all our sealers with operating temperatures up to 1100°C to 1200°C are available in both flat and round types. Heating elements for foot sealers are available in 2mm, 3mm, 5mm and 10mm widths for flat elements and 0.8mm, 0.9mm and 1mm diameters for the round elements. Round elements are used for cut and seal type applications. Teflon coated nichrome wires in 0.6mm diameter are also available for foot sealers.

    $7.00
  • Replacement Heating Element – 14″ x 8mm

    Replacement Heating Elements (Nichrome) for all our sealers with operating temperatures up to 1100°C to 1200°C are available in both flat and round types. Heating elements for foot sealers are available in 2mm, 3mm, 5mm and 10mm widths for flat elements and 0.8mm, 0.9mm and 1mm diameters for the round elements. Round elements are used for cut and seal type applications. Teflon coated nichrome wires in 0.6mm diameter are also available for foot sealers.

    $7.00
  • Replacement Heating Element – 12″ length

    Replacement Heating Elements (Nichrome) for all our sealers with operating temperatures up to 1100°C to 1200°C are available in both flat and round types. Heating elements for foot sealers are available in 2mm, 3mm, 5mm and 10mm widths for flat elements and 0.8mm, 0.9mm and 1mm diameters for the round elements. Round elements are used for cut and seal type applications. Teflon coated nichrome wires in 0.6mm diameter are also available for foot sealers.

     

    • 12″
    • Compatible with: FS-300, KF-300, TISF-302, TISH-300, W-300..
    $3.00